Zebra 105SL Thermal Label Printer "ribbon stick" Questions

my 510s is having issues with printing. The print ribbon is sticking to the paper, thus tearing the ribbon and causing a paper jam. Ribbon is sticking to paper as it travels through the printing ...

ribbon and media sticking together bypassing cutter Zebra 105SL just installed it and when I print my label the media sticks to the ribbon misses the cutter and shoots out the top or wraps around the ...

is there a way to avoid the black ink ribbon sticking and being pulled through with the white label? the black ribbon pulls through and does not wind up in the spool, instead it seems to be sticking ...

pls hep me... Your ribbon is not firm enough - roll the ribbon at the top until it is firm. If it is too loose it will stick to the paper. Follow directions to ensure that ribbon is installed properly

...testing. When a label is printed it just prints 1/4th of the label,then the printer stops and paper/ribbon light,Pause light and data light is on.When I open the print head,The label and the ribbon ...

...The ribbon out message may be due to the fact that the ribbon is not correctly placed and is not detected by the sensor.Try to place the ribbon correctly or stick a piece of ribbon on the ribbon ...

...ribbon now seems to stick to the paper, almost as if the rewind motor cannot pull up the slck. check that you are in thermal transfer mode in the driver. - Check in the diagnostics mode that the ribn ...

oki ml521 printing problem A new original OKIml520/521 ribbon only lasts 4 days in the printer - then I have to replace it. What can the problem be? It sounds impossible that a ribbon is finished in 4

stick to the ribbon. Is there any way of fixing this If I had a guess...this label material sounds old or stored improperly...possibly to much head pressure....I would suggest some known good material