Briggs & Stratton Prosumer 2800 PSI (Gas - Cold Water) Pressure Washer - 20324 "added oil pressure washer engine" Questions

Ad

...added oil to make sure it is full. Still no luck getting it to pull. honda pressure washer ohv was running great died like someone turned of the switch ! has spark, oil full, sparkplug looks good any ...

Ad

...from your question. It is a four stroke engine and the fuel doesnt need added oil. Northstar washers are available online at Central Power Equipment. You might find an electronic owners manual

Ad

...added oil to the engine and when I press hand nossle white smoke billows out front of engine sounds like the engine is overfull.drain all oil oil & start again you may have a lot of petrol in the ...

...oil in both, engine and pump after 50hrs. If you live in colder climates, where freezing is possible, do not forget to drain pump and high pressure hose from water to avoid winter damage. Hope this ...

pressure washer won`t pressure up engine runs good pump does not produce pressure Have you tried adding 30 wheight pump oil,under 1 qrt usually

Question about Honda Garden

3 Answers

...oil. added oil. Do you have to reset the low-oil sensor? I can't get the cord to pull. I'ts a possibility that the engine has seized, remove the spark plug and look at it it will give you and ...

Question about Craftsman Garden

1 Answer

...Added new oil, and gas. started but is smoking from muffler and is dripping what appears to be oil near the exhaust end. I shut it down. What could this be due to? The first thing I would check would ...

...oil changed. Pressure is fine but while machine is running, engine seems to sputter and make popping noises. I have used carburetor cleaner and as well cleaned the fuel tank and added fresh fuel. I ...

...oil in both, engine and pump after 50hrs. If you live in colder climates, where freezing is possible, do not forget to drain pump and high pressure hose from water to avoid winter damage. Hope this ...

Question about Stanley Garden

1 Answer

oil and added fresh gas but it still won't start. Probably unrelated to the engine problem, but once I took it apart to clean and put it back together water doesn't flow out of handle spay gun like it

Not finding what you are looking for?
Briggs & Stratton Prosumer 2800 PSI (Gas - Cold Water) Pressure Washer - 20324 Logo

2 questions posted

Ask a Question

Usually answered in minutes!

Top Briggs & Stratton Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Briggs & Stratton Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...