U-Line 15R Compact Refrigerator "original capacitor fan" Questions

...fan runs, but no cooling, compressor doesn't kick on. Try putting it in test mode. Easiest way is to take cover off of board and look for little test button. Press once and fans and compressor should ...

...capacitor (c29 and c30, i guess - near the 7805 regulator). Both had around 0.5% of their original value, and i belive it was the source of the problem. Everytime the processor tried to start the ...

...capacitor (c29 and c30, i guess - near the 7805 regulator). Both had around 0.5% of their original value, and i belive it was the source of the problem. Everytime the processor tried to start the ...

...capacitor and over load. See it has everything and is much better than the original. Remove the back cover, pull the original relay off the compressor pins, cut the two wires and install according to ...

original refrigerator problem. Refrigerator and freezer temps changing rapidly, freezer working properly one minute and 6-12 hours later everything in freezer fully defrosted, freezer compartment warm

original refrigerator problem. Refrigerator and freezer temps changing rapidly, freezer working properly one minute and 6-12 hours later everything in freezer fully defrosted, freezer compartment warm

original poster. This lead me to determine that the windings were not open or shorted. The wiring to the compressor also fed the condenser fan, and it was running, so power was at least all the way to

...capacitor. Item 17 this link: http://www.searspartsdirect.com/partsdirect/part-model/Kenmore-Parts/Refrigerator-Parts/Model-10653559202/0582/0165000/P0308109/00011?blt=06&prst=&shdMod= ...

...capacitor was blown(you can tell this because the top is buldged out) and a part(not sure what it was called) that has an aluminum heatsink attached to it in the middle of the board. I had someone ...

...original overload was designed to trip out and shut power to the compressor based on correct amperage draw, and compressor body temperature. Once done, you should have a ptc relay with a start ...