Uniden BC72XLT Handheld Scanner "turn speaker" Questions

Ad

Question about Icom Radio Communications

1 Answer

How to Fix Icom IC-M700 HF Transeiver? The RX signal (green light) is turned on and the TX (red light) turned on when the mic is pressed but there is no sound come out from the speaker. This is a ...

Ad

Question about Uniden Radio Communications

1 Answer

turn it back just a little until you don't hear any static. Extend your antenna all the way out. If still no sound , try plugging a external speaker in the external speaker in the jack on the unit. If

Ad

Question about Icom Radio Communications

2 Answers

very low volume I have the SQL turned all the way counter clockwise and the volume all the way up and still have very low, weak sound? check the mode button and make sure you are in the right mode, ...

Question about Uniden Radio Communications

1 Answer

Why does the uniden bearcat 210LXT have low volume. When turned full blast you can hardly hear it. Is there something we can do? Your scanner is about 30 years old, so the electronics are old and ...

Question about Uniden Radio Communications

1 Answer

...the wirering is intact also check the speaker jack at rear of scanner ,could be shorted out ,also turn squelch anti clockwise fully ,hope this helps you please let me know what the out come was ...

Question about Uniden Radio Communications

1 Answer

...BCD386XT No sound. If it is actually stopping on an active broadcast and if you have the volume turned up (press down on volume button and release, then rotate to adjust) then the most likely ...

Question about Uniden Radio Communications

1 Answer

turn clockwise. Make sure the slots on all of them are horizontal. Don't forget to plug your speaker wire back in before you put the cover back on. Radio Shack 272-1092 micro lamps Also referred to as

Question about Radio Communications

1 Answer

...Connect a set of headphones or a small ear plug in the jack on top of the scanner turn volume up, squelch open, then see if you have sound, if so replace the internal speaker. hope this was

...I not getting any sound from my pro-135 scanner it just stopped giving sound was working fine then turned on following day and just didn't give sound at all try external speaker first to see what ...

Question about Uniden Radio Communications

1 Answer

turn it on it works for a minute then keeps scanning but you can not here anything Have you checked the programming of the frequencies? Have you adjusted the squelch? Plug in an external speaker in to

Not finding what you are looking for?
Uniden BC72XLT Handheld Scanner Logo

279 questions posted

Ask a Question

Usually answered in minutes!

Top Uniden Radio Communications Experts

John
John

Level 2 Expert

510 Answers

eradiostore
eradiostore

Level 3 Expert

1672 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you an Uniden Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...