Sharp FO 4450 Laser Fax "machine drum near end" Questions

...the drum when told to do so. new drum it won't print still says to replace drum. Help! did you reset the drum counter still receive the error message Replace Drum Drum End Soon Drum Near

Drum near end machine works but says drum near end. It is MFC 8460N Order a new drum, part number DR520, from an office supply store or Brother (http://welcome.solutions.brother.com/bsc/public_s/id/us

Model: MFC-846ON Drum near end This is a warning for you to have a new replacement drum "on-hand" as soon the machine will tell you that the drum life is finished and you are to install a new drum.

replaced it TOO SOON. You will have to find someone to replace the mini-fuse in the drum cartridge...it will still be ok...but soon you will not be able to print on the machine,,,READ THE USERS MANUAL

...do I reset the ''drum near end'' message on the Oce fx3000 machine? open the front door and press clear. drum reset? should come up on screen This above solution worked, I was deemed a miracle

...drum. Close the door. Other models may have to press the 'Options' button located near 'Copy'. This should work. just follow these 2 procedures.fig 15 and 16. or go to this link if you can't see the ...

...drum unit is near the end of its life. Use the drum unit until you have a print quality problem, then replace the drum unit with a new one. This message would continue to appear if the drum counter ...

...drum is nearing the end. If you see black lines on the drum, it is very likely that the drum unit is bad. Replace the drum unit and rest the drum counter. If you wait too long, you will cause toner ...

machine paper gets caught in toner/drum unit. The noise seems to be coming from the left side at the front (near where the door swings down). Looking at the edge of the fuser makes me think it doesn't

...DRUM SOON", your machine may require service. Please contact the Customer Service Center. after the drum replacement, the unit might need to be reset, can you post the model so I can look into this? ...