...what I may have to replace. Make sure that the motor wires havent come off the electronic speed control wires. If you can here the motoe turning make sure the pinion gear hasn't come off the
...speed. This happens when you bump a spinning rotor against something. Determine which one it is by observation or logic (i.e, the one that turns clockwise will produce counterclockwise torque, which ...
pinion I think is the terminology) it puts less stress on the motor. The top speed will be reduced apparently but the gearing problem is resolved. Other things they suggested where replacing the metal
...speed control) is what the battery and motor are connected to. It gets the signal from the receiver and controls the power to the motor. If the motor revs I would check: 1) Make sure set screw is ...
speed control is connected to the receiver. If you can hear the motor run, check the pinion gear on the motor to make sure it is tight, and check the slipper clutch to make sure it has not backed off.
83 questions posted
Usually answered in minutes!
2 Questions
3 Questions
1 Questions
1 Questions