JVC HD-52Z575 52" Rear Projection HDTV-Ready Television "ok button remote" Questions

...select the options displayed by using the down arrowed button press ok go to search/tunig select auto tuning/search press ok it will select all channels automatically and store them press menu to ...

...cleaning the board this will help make the contact the other way to test remote is a camra on phone turn on camra and press the buttons and if you see a flashing light then that button ok try the ...

OK because it has only one infra red receiver (remote receiver) to catch remote signals. So TV remote seems bad as it works on channel buttons only. Here is an easy test for remote, watch remote front

...ok button . then press and release the # 0 buttonthe indicator will flash twice. this may not work if it not a uviversal remote. if the remote that came with the set just take the batteries out for a ...

...ok button. need help! thank you ax kidz firss "wher remote?" o.k., they def/dum/blnd so go to manuel, he noe. beep for remote?! manuel reconfigur channels, yea; its a real nutbuster. but then der u r ...

OK) button on the TV Set. 9) To Check if it was a success 10) Now press SELECT, then SELECT again to confirm the reset of the counter ** If the procedure above does not work swap steps 5 & 6. ** For a

...button on the remote control to highlight your country and press OK. 2. Use the number buttons and/or the arrows on your remote to enter your zip code or postal code. Press OK when you?re fi nished. ...

button until you come to lamp hour resetting press ok on remote and now lamp hour is reset good luck with it and God bless! Press and hold the Mute on the remote and Enter on the TV ( together ) until

...OK) button on the TV Set. 9) Come back to this blog and post your HOURS on our site 10) Now press SELECT, then SELECT again to confirm the reset of the counter ** If the procedure above does not work ...

OK button). If all the functions work, press the OK button to store the code. If the indicator light remains solid red after blinking 3 times the code is incompatable. You then need to restart back on