Question about Chevrolet Equinox
...fuel pressure sensor located on the engine of a 2012 2.4L Chevy Equinox? why assume it has one./?
no problem stated just how to shop.
the dealer has the part. if it has one at all.
2.4 flex ...
Question about Chevrolet Equinox
...Pressure Fuel Pump 3 - B23F Camshaft Position Sensor - Intake 4 - B37 Engine Oil Pressure Switch 5 - B68 Knock Sensor 6 - B26 Crankshaft Position Sensor 7 - M64 Starter Motor 8 - Q2 A/C Compressor ...
...fuel pump is okay and that my vehicle will always start. Any ideas as to what is causing this problem? It's annoying when it sounds like it's trying to start and you just have to sit there until it ...
...pressure switch. As for the fuel gauge, it may be due to the shape of the tank. The fuel gauge gets its signal from a floater inside the fuel tank that moves up and down as the fuel level changes. At ...
Question about Chevrolet Equinox
...TECHNICAIN HAS DIAGNOSED THE PROBLEM TO AVOID SPENDING YOUR HARD EARNED MONEY ON PARTS THAT MAY NOT CORRECT THE PROBLEM. Also always check fuel pressure for correct spec for your make and engine
Question about Chevrolet Equinox
...fuel pressure, o2 sensor, ignition misfire repair, fuelinjector problem. i dont want to replace anything i dont have to, ialready have to change front brakes, 4 tires and i only have 50,000miles... ...
Question about Chevrolet Equinox
...fuel pressure.? make sure the 02 sensors work, (but they are inactive when accelerating) check that the engine holds closed loop status at idle hot. if not, fix that first . here is the real data. as ...
pressure it 1LBS it increase in temperature radiator cap rated increase the boiling point to 210 F this is the optimum where all sensor go into fuel control. When you do this high RPM method you chase
fuel rail pressure sensor / circuit.Problems could include a failed sensor, high or low fuel pressure, or wiring problems between the sensor and the computer.Low fuel pressure can be caused by a dirty
...Fuel Rail Pressure Sensor CKT Range/Perf- High fuel pressure - Low fuel pressure - Damaged FRP sensor - Excessive resistance in the circuit - Low or no fuel - Wiring harness connector of the fuel ...
271 questions posted
Usually answered in minutes!
1,876 Questions
446 Questions
127 Questions
73 Questions
52 Questions