2011 Chevrolet Equinox "change brake light" Questions

brake fine only the abs light stays on? I have double checked that pads and they look fine. Did you bump the ABS pickup at the wheel hub when you changed the brakes? Or are the wires maybe nicked? The

brake light works the one on top,but the regular brake lights dont As in the previous comments the brake switch wire goes to the turn signal switch and the third brake light. Since the 3rd brake light

brake light wont work...I changed the bulb and the light works but when i push on the brake it wont light up...any ideas of what it might be... If you're sure the bulb is good, your next step would be

...Light On I installed new brake pads and front rotors on my 2005 Chev Equinox. Simple job and everthing went on easy with no problems. The next day the ABS and Traction Control Lights came on and ...

brake system lights keep coming on. the brakes were resently changed probably air in brake line , if you had work done by someone they should have bleed the lines return and ask it be done

...change, they both still come on, and my brake pedal rubs, like it won't stop. Nothing to do with brake rotors/pads etc You have an ABS Braking System Malfunction that needs to be resolved The abs ...

...change for the computer.You should have your local GM dealer check these systems for failures. These 2 systems work together through the EBCM (Electronic Brake Control Module). Hope this helps. That ...

...brake it does same thing. The other day I hit a pot hole in the road and my abs light and traction control off lights came on and didn't go off until I turned off my car. I have changed both ...

...brake lights do not work when I push them on my 2005 chevolet equinox, but the light are still on. Could it be the fuse? They are dual filament bulbs so best thing is to change at least one of them - ...

...brake s sometimes it want stop the pedal is hard .the scanner shows a left front wheel speed sensor i have changed the hub and sensor but no change in the problem I have checked the wiring up to the ...