Kenmore 44921 Front Load Washer "removing control panel 417" Questions

Ad

Question about Kenmore Washing Machines

1 Answer

control does not see it draining water out. When you start the washer, you should hear the drain pump running or at least making a humming noise. A service technician would: - Check the drain hose for

Ad

Question about Kenmore Washing Machines

1 Answer

...panel and check the pump on the lower right side. See if there is any gunk or coins in there by removing the hoses attached to it. Have a flat pan or a bunch of towells ready to catch the remaining ...

Ad

Question about Kenmore Washing Machines

1 Answer

control panel has a screw in it that attaches to the top of the machine.If so you will need to remove this also to avoid breaking the panel. Hopefully you will be able to view all you need to , do you

Question about Washing Machines

1 Answer

...control panel.......help! This sounds like a faulty micro switch on the door catch. Try pressing inwards on the door glass at the catch area whilst you press start and hold it oressed for a few ...

Question about Kenmore Washing Machines

4 Answers

...panel you will be able to see if the belt is on in back. If this does not clear up the problem, more than likley it will be in the motor control board. Catriver...post back. My washer fills up with ...

Question about Kenmore Washing Machines

1 Answer

417-44102. There could be a number of problems here but lets start with the drain pump itself. On this model, even though the tub looks empty there could be water under the basket. There is a pressure

Question about Kenmore Washing Machines

1 Answer

...control unit or mcu or the main board ccu,remove the bottom oanel,you should see a tech sheet on the back of panel or taped to the side of the wall,it will tell you how to run it in diagnostics to ...

...control behind and below the cycle knob was not fully snapped shut, as the washer would go through the cycles, the drum would bump against this housing and cause the wires (inside) connections to ...

Question about Washing Machines

1 Answer

...control board and 1 on the pump motor � be sure to remove those first.  6. Shocks, push the lock tab to allow the pin  to be slid out of the tub and the shock will be free from ...

Question about Whirlpool Washing Machines

1 Answer

...control board and 1 on the pump motor � be sure to remove those first.  6. Shocks, push the lock tab to allow the pin  to be slid out of the tub and the shock will be free from ...

Not finding what you are looking for?
Kenmore 44921 Front Load Washer Logo

22 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Alexander

Level 2 Expert

171 Answers

Cindy Wells

Level 3 Expert

6688 Answers

vince

Level 3 Expert

2530 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...