...total care system gets stuck on the Pause Cool Down step and then again on the spin setting. It doesn't even drain after rinsing. The washer has a temp sensor for the rinse cycle , so just set the ...
Question about Kenmore Washing Machines
...total care system top load washe is only using hot water and not the cold or warm. Both the nozzles are on. please let me know why i cannot use the cold water not using the cold water cycles even ...
...Total Care System top load washer, model # 110.26942503. The timer stops turning at Rinse on the Ultra Clean mode and at Cool Down on the Permanent Press II mode. It will start the next cycle if I ...
he4t dispenser problem soap I have a he4t - the soap won't totally dispense from the dispenser. it turns hard and stays there Remove the soap tray and clean the orifice. Thanks for using FixYa - a 4 ...
...Total Care System, Model 11015942400. Sunday it was done rinsing and stopped. I tried to get it to drain, spin but nothing. I paid a company to come out to repair it since they had just fixed it in ...
total care system) is making a humming noise even though I've taken all the clothes out of it. The agitator works, but there's a humming noise. I've stopped it and re-started it, but I don
Question about Washing Machines
...total care system retains bleach even after the 2nd rinse cycle. It then deposits bleach from the holes in the drum on to another load of dark clothes leaving little bleached polka dots on the dark ...
...Total Care System and it is not spinning. What do I do to fix it? Hi. Check if there is drain blockage. That will result in cycle not advancing to spin. To check drain system, check first the drain ...
...Total Care System Top Load washer, and for the past two days, the water level will not fill past the medium level even if the setting is on Large level. The water-level switch regulates your ...
...system of lint. Can you please tell me how to open the bottom panel. I do not see a way. My dryer is a Whirlpool Ultimate Care II dryer model LEQ8858HQ0. I know it must be a few screws, but where or ...
3,909 questions posted
Usually answered in minutes!
3,839 Questions
2,098 Questions
1,642 Questions
1,023 Questions
908 Questions