...Series 80. The cycle stops before Kenmore Washer Series 80. The cycle stops before the drain and spin. Tried to put it back on the spin, but it won't drain check to see if you have it set on drip ...
Question about Kenmore Washing Machines
...80 series will spin when draining, but not agitate or spin during spin cycle. My Kenmore 80 series will not agitate during wash cycle or spin during the spin cycle. I can here timer as it progresses ...
Question about Washing Machines
...80 Series washer wont spin or drain at end of cycle I have a Kenmore Series 80 washer that fills fine and runs its course but when it approaches the spin cycle, it just turns off and the tub is full ...
...series 80 washer won't drain after wash cycle Try the 'drain' portion of a few of the other cycles (heavy, perm. press, delicates) and see if it will drain/spin there. You can also try ...
Question about Kenmore Washing Machines
...series 80 washer having spin problems. Sometimes it will start iteself, sometimes if I give it some clockwise rotation it will continue. Spin cycle still doesn't dry out c Top loading Kenmore washer ...
Question about Kenmore Washing Machines
...80 Series Hvy Dty Washer? How do I check and replace the "water level sensor" on my Kenmore 80 Series Hvy Dty Washer? Water will not shut off on while filling the drum on any water level selection. ...
...Series 80: Machine does not drain or spin at the spin cycle. Make sure there is voltage present to the motor when the cycle is ON> If not the program controller is faulty, If yes the motor must be ...
...80 series top load washer. It will not drain during spin cycle. If I run it through a second spin cycle it will usually drain. Any ideas Hi, Problems with a washing machine not spinning or not ...
...Series 80 Washer Won't Spin I have a Series 80 washer (Model 110.23832100) that fills, washes and drains but when it enters the spin cycle it will just sit. Raising the lid and closing it will start ...
80 Series washer will not spin; MOD#110-22882101 Kenmore 80 Series washer, MOD# 110-22882101; I have the same problem, except mine makes a sort of grinding noise in the spin cycle, sort of like a gear
3,909 questions posted
Usually answered in minutes!
3,839 Questions
2,098 Questions
1,642 Questions
1,023 Questions
908 Questions