Kenmore 3.5 cu. ft. Front Load Electric Washer "loading washing maching opens" Questions

...loading washing maching only fills up with water My maytag washing top loading washing maching will fill up with water and then it just stops and beeps. It is as if the top of the machine is open. ...

washing maching, top loading, about 8 years old. Lost my daughter retainer in the washer, found one retainer right under the agitator, wondering if the other retainer went under the agitator. Is there

I wanted to take some clothes out during the cycle but don't know how to stop it properly and get the door unlocked your mach depending on model and cycle selected has a 3 to 5min "add a garment" ...

...washing maching won't fill. at start, it tries to fill the tub with water, but instead drains out from the bottom of the washer onto the floor. That means that eithere the membrane water lever switch ...

...washing maching refuses to open after the cycle.machine model is zanussi turbodry 1200 Either clip on the door is faulty or its the door interlock in which the door locks into easily replaced by ...

...washing maching door is not opening my machine He 3t model door is not opening please help Hold in "end of cycle" for 3 seconds. Or if you have a pic of a "key" on one of the buttons, hold that in ...

...washing maching for about 4yrs and it's been fine upto now but it's started smelling of damp. it washes fine but the smell after the wash is awful. Any ideas??? Its your filter that needs to be ...

Kenmore two way tumble action washing machine - shakes, vibrates very loud kenmore front load washig machine sounds like it is flying apart - vibrates very bad and is very loud. sounds like you have a

front door won't open the door won't open/unlatch Check water draining from mach...if not clean filter.....Good luck

washing maching made a loud bang sound when in the final spin cycle and when I opened the door there was smoke inside the drum that smelled like rubber versus electrical burning. The drum no longer is