Question about Kenmore Elite Washing Machines
seal is torn and I want to replace this piece The front seal on my washer is torn and now it leaks horribly. I want to know if a)I can replace this piece and b) how do I do it?? door boot or baffle as
torn seaL ON KENMORE ELITE WASHER i havea front load kenmore elite washer with a torn seal in front ,i have bottom front cover off ,but i dont know how to remove center cover with door off i have a ...
Question about Kenmore Elite Washing Machines
...seal was torn and we had a Sears repairman replace it - he said it required a special tool to install it (which he didn't have) but through some long and physical process, he was finally able to get ...
Question about Kenmore Elite Washing Machines
...and when it does I see a shirt twisted and tangled with the rubber seal of the door and its totally torned and worthless. Is there anyway to fix the seal or replace it? The washer is less than two ...
Question about Kenmore Elite Washing Machines
seal in front of washer is torn. Not sure if this is the problem. No water is leaking from back of washer. The rubber seal is known as a bellow. If the bellow is torn, more than likely it IS the cause
...washing machine and the rubber bellow lip that seals the front door from leaking has torn causing water to leak out. Can this bellow be repaired or easily removed and replaced without calling a ...
Question about Kenmore Elite Washing Machines
seal torn The seal on my washer is deformed, and I found a tear on the inside of the rubber gasket. Is this a part that can be purchased and repairs done by me? Or do I have to have Kenmore repair it?
...torn to be used again, of course but it answers the age-old question of "where did all the matching socks go!" What I recommend to anyone who has this washer to do their regular cleaning cycle. After ...
Question about Kenmore Elite Washing Machines
...seal you are referring to is called the bellow. It seals the front of the wash tub to the door frame. The wire hoop is the front bellow clamp. If the bellow is not damaged, you can reinsert the clamp ...
...torn. Apply a thin film of petrolium jelly on the threads of the cap and tighten until snug. Carefully grip the handle with a pair of channel locks or pliers and give the cap another 1/4 turn and it ...
4,938 questions posted
Usually answered in minutes!
1,023 Questions
0 Questions
69 Questions
45 Questions
20 Questions