...cover off then remove the strainer. It will have gray gook on it plus God knows what else. Clean the strainer in the sink replace screw the cover back on and your in business Thanks for contacting ...
...cover closed your lid safety switch is shot,you need to remove 2 side control panel covers that pop off,then remove 2 screws that are under here, then control panel will separate from top to let you ...
Question about Kenmore Elite Washing Machines
...to see if it is clogged. Keep in mind that when you remove this cover all the water in the machine is going to come out. 3) If the pump isn't clogged then you may need to replace the pump
...remove the large cover to the "button trap" by uncscrewimg the cover, it will be righthin front of you in the center of machine when cover removed, im sure youll find your blockage within there my ...
...a torn seal in front ,i have bottom front cover off ,but i dont know how to remove center cover with door off i have a kenmore elite washer the red lite is lit on controlles locked how do i solve ...
...access plate on the kenmore elite model number 110.42936 probably not drain hose ..remove screws bottom cover remove clean out port on pump and clean.. after removing as much water as possible from ...
...cover on the pump. Thanks The only way to access the imperller is remove the coin tray (unscrews and pulls out) and the hole into the pump on the right side will have the impeller right there..The ...
Question about Kenmore Elite Washing Machines
...hairpins, whatever else has been left in pockets and gone into the washer. When you screw the cover back on make sure the gasket is seated properly. Also, expect some water when you remove the
...cover How do I remove the front panel cover of my kenmore elite 4t to get to the computer of the machine. I'd like to look at it myself before calling expensive repair man. My washer is not draining ...
4,938 questions posted
Usually answered in minutes!
1,023 Questions
0 Questions
69 Questions
45 Questions
20 Questions