...bottom lip) After removing the cover you will see a white plastic unit with a screw on cover on the front. Unscrew the cover (no tools needed). Pull the cover off then remove the strainer. It will ...
Question about Kenmore Elite Washing Machines
...Remove the bottom panel. 2) The pump access cover is in the centre. You can remove this to see if it is clogged. Keep in mind that when you remove this cover all the water in the machine is going to ...
...a torn seal in front ,i have bottom front cover off ,but i dont know how to remove center cover with door off i have a kenmore elite washer the red lite is lit on controlles locked how do i solve ...
Question about Kenmore Elite Washing Machines
...remove the 3 screws from the very bottom. The cover will come off. I just had this same problem. In the center bottom there is a white cover that unscrews. Beware you may have a bunch of water come ...
...were still wet and now it has stopped spining you can hear the motor going but the clothe are not spining motor you hear is probably pump motor ..remove bottom cover remove acess port on pump and ...
Question about Kenmore Elite Washing Machines
...remove lower cover on front..3 screws across bottom edge. there is a screw-on cover to a clean out. has a screen in there and may be clogged. prepare for a lot of water..u might lean it back against ...
...remove the three screws on the bottom panel. You will see 3 inch removable slotted cover on the pump. Turn this counterclockwise and remove the inner strainer. Clean all debris from this strainer and ...
Question about Kenmore Elite Washing Machines
...remove the bottom cover, unscrew the round cover off of the drain pump, pull it out, and clean out all the coins, toys, hairpins, whatever else has been left in pockets and gone into the washer. When ...
...the very bottom. Use a 9/32 socket to remove them. The front cover slides right off. The drain trap cleanout is right in the middle. Turn the large white knob counter-clockwise to remove it and
...access plate on the kenmore elite model number 110.42936 probably not drain hose ..remove screws bottom cover remove clean out port on pump and clean.. after removing as much water as possible from ...
4,938 questions posted
Usually answered in minutes!
1,023 Questions
0 Questions
69 Questions
45 Questions
20 Questions
