Question about Kenmore Elite Washing Machines
do laundry asap! Select PAUSE/CANCEL twice to cancel the cycle. Select DRAIN & SPIN if there is excessive water in the washer. Re-select cycle and press START. If the problem remains, call for service
...spin speed buttons, but can't cancel the load or open the door. according to kenmore, you should press the "pause/cancel" button twice and it should release it. Â it may also have locked up ...
twice to cancel the cycle. Select DRAIN & SPIN if there is excessive water in the washer. Re-select cycle and press START. If the problem remains you will need to call for service. This type of repair
...spin either... I think that the motor may have gone out but I can't tell for sure because the F2 number has been beeping as well as the sud. It wont let me stop the cycle, and if I am lucky ...
...spin cycle Twice in the life of my machine I've had the discharge line plugged. It should be the first thing to check. 1. Remove 3 torx screws on the bottom of the lower front panel. 2. Remove the ...
Question about Kenmore Elite Washing Machines
Kenmore HE4T washer won't rinse. Valves open to Kenmore HE4T washer won't rinse. Valves open to fill the wash cycle and then it runs through that fine and drains and spins. When it starts the rinse ...
Question about Kenmore Elite Washing Machines
SPIN CYCLE. THE CONTROL DOES NOT DETECT IT SPINNING.THE RPS SENSOR ON THE BOTTOM OF THE UNIT NEEDS TO BE TAKEN OFF AND PUT BACK ON ABOUT 10 TIMES. SOUNDS WEIRD BUT USUALLY FIXES IT. THEY DO HAVE A KIT
...spin, but there is still water in the tub so it is not completely emptying. I had set it to wash normally which is a 45 minute cycle.When I discovered the problem it was stalled at 12 minutes. I ...
...spin - start (I could hear it try to click locked) Then I pushed to stop it (then I hear the door lock click) I tried all the different wash options and finally one of them allowed me to cancel the ...
Question about Kenmore Elite Washing Machines
...twice to cancel the cycle. Select DRAIN & SPIN if there is excessive water in the washer. Unplug the machine for thirty seconds to reset the Central Control Unit Re-select cycle and press START. ...
4,938 questions posted
Usually answered in minutes!
1,023 Questions
0 Questions
69 Questions
45 Questions
20 Questions