Question about Kenmore Elite Washing Machines
...lid switch assembly can fail either mechanically or electrically. Test any electrical switches with an Ohm meter for continuity. The switches should have continuity according to their design. Door ...
Question about Fisher and Paykel Washing Machines
...won39;t go thru spin cycle. Lid lock light flashed some at first, now won39;t come on at all. Hi there the lid lock switch is faulty and needs to be replaced - cannot be bypassed
Question about Whirlpool Washing Machines
...lid lock light keeps flashing and the washer won39;t start lid light flashes even after power button is turned off Possible that the switch is defective, there is fault in the line to the control ...
Question about Crosley Washing Machines
...lid switch assembly can fail either mechanically or electrically. Test any electrical switches with an Ohm meter for continuity. The switches should have continuity according to their design. Door ...
Question about Whirlpool Washing Machines
...lock lid light flashes and it does nothing. can this be fixed? I have a whirlpool cabrio top load washer. I did have a problem with the spin, but I fixed that problem. Now it won't start it's cycle; ...
Question about Washing Machines
Lid lock light is flashing and start and spin lights both flashing. Have tried pushing sta Whirlpool Cabrio toploading washer, lid is locked and won't open. Time remaining is flashing 1 minute
Question about Indesit Washing Machines
...lid switch assembly can fail either mechanically or electrically. Test any electrical switches with an Ohm meter for continuity. The switches should have continuity according to their design. Door ...
Question about Maytag Washing Machines
...lid won39;t lock . it keeps clicking and the sensing light keeps flashing Thank you janesstone ive been looking for 2 hours trying to figure out that simple wire bypass i just couldnt find what ...
Question about Kenmore Washing Machines
...lock with an Ohm meter. The switches should have continuity according to their design. If the washer won39;t start the lid switch assembly might be defective. This is a very common problem. The lid ...
4,939 questions posted
Usually answered in minutes!
1,023 Questions
0 Questions
69 Questions
45 Questions
20 Questions