Question about Kenmore Elite Washing Machines
...lamp or radio into the outlet to check it. If the outlet is dead, check the circuit breakers or fuses for the home. Power Cord If the washer won't start, check to be sure there is power to the ...
...lamp, appliance, or voltage tester. Be aware that most electric dryers don't plug into standard 120- volt receptacles; they operate on 240 volts. Make sure the door is closed completely, the timer is ...
...lamp, appliance, or voltage tester. Be sure the washer lid is closed completely. 2) If the receptacle seems dead, check the circuit breaker or fuse that serves that circuit. 3) Unplug the washer and ...
...lamp, appliance, or voltage tester. Be sure the washer lid is closed completely. 2) If the receptacle seems dead, check the circuit breaker or fuse that serves that circuit. 3) Unplug the washer and ...
...cord. You can use a working lamp, appliance, or voltage tester. If it is the case then the overload protector might have tripped and you need to follow these steps--- Switch it off. Unplug the unit ...
...lamp, appliance, or voltage tester. Be sure the washer lid is closed completely. 2) If the receptacle seems dead, check the circuit breaker or fuse that serves that circuit. 3) Unplug the washer and ...
...cord, (a lamp cord with spade connectors on the end to attach to the wax motor), and with the latch opened up and the test cord attached to the wax motor plug it in and watch the plunger. It should ...
...lamp, appliance, or voltage tester. Be sure the washer lid is closed completely. 2) If the receptacle seems dead, check the circuit breaker or fuse that serves that circuit. 3) Unplug the washer, and ...
...lamp,radio,etc to make sure it is working. If it doesn't work go to the circuit breaker and look for a breaker that is not in the on position and turn it off the turn it on to reset it. If the ...
...lamp. If it is OK the washer cord plug may be bad and need to be replaced. If you can get a help of one who knows to make tests with a multimeter you may narrow down the fault. This fault seems to be ...
4,938 questions posted
Usually answered in minutes!
1,023 Questions
0 Questions
69 Questions
45 Questions
20 Questions
