Question about Kenmore Elite Washing Machines
...power failure during the dryer's cycle. Press and HOLD start to continue the cycle, or press off/pause to clear display. Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your ...
...power. Re-select cycle and press START. If the problem remains, call for service. "F02" (Drain Problem) Select PAUSE/CANCEL twice to cancel the cycle, Unplug washer or disconnect power. Cl_eck the ...
Question about Kenmore Elite Washing Machines
...connection to washer clogged? Are water inlet hoses kinked? Are water inlet hoses frozen? Plug in washer or reconnect power. Re-select cycle and press START. If the problem remains, call for
Question about Kenmore Elite Washing Machines
power outage, tried unplug/re-plugging. Any reset or suggestions? Need to do laundry asap! Select PAUSE/CANCEL twice to cancel the cycle. Select DRAIN & SPIN if there is excessive water in the washer.
Question about Kenmore Elite Washing Machines
...cycle. it is in the water inlet solenoid. check if there is power to the water inlet solenoid and check also if there is water going into the unit. if there is power to the solenoid, then check the ...
Question about Kenmore Elite Washing Machines
...Power is ok at In mid cycle machine went dead. Power is ok at outlet. I even changed outlets, panel is still dead & non-responsive. What's my punch list to begin troubleshooting? ...
Question about Kenmore Elite Washing Machines
cycle' button right of panel for 3 seconds, power shd be on. And wait for a couple of minutes to try door. Possible your filter or pump is clogged. Should be a hose in front below panel to drain water
Question about Kenmore Elite Washing Machines
...front loader has power and there are not any error codes on the LE board. You can change the wash cycles and all seems to work fine but when you press and hold the start button nothing happens.
Question about Kenmore Elite Washing Machines
...power failure during the dryer's cycle. Press and HOLD start to continue the cycle, or press off/pause to clear display. Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your ...
...Power] to turn on the washer. Do not choose a washing cycle. Press the [Spin Speed] key until "No Spin" is selected. Press [Start/Pause] to begin a drain only cycle. After the drain only cycle has ...
4,938 questions posted
Usually answered in minutes!
1,023 Questions
0 Questions
69 Questions
45 Questions
20 Questions