GE WDSR2080D Top Load Washer "tub low" Questions

...low. Is there a recommended fill level that should be reached (inches)? At the "small load" setting there is 4" of water in an empty tub. At the "large load" setting, there is 7.5" in the tub. Water ...

...LOW. BUT THE FRIGIDAIRE TECH SAID THE WATER LEVEL SHOULD UP TO THE THIRD HOLE ON THE TUB, WHICH IT IS. IS THERE ANYWAY I CAN ADJUST THE HEIGHT OF THE WATER IN THE TUB? you cant the water is meter ...

...low Can the water level pressure switch be adjusted to fill the tub to a higher level? My tub only fills two thirds of the way up the inner wall below the rim, in the area where the inner tub holes ...

low in machine and it doesn't spin properly Is the drum bouncing around? Remove the front lower panel and the top from the cabinet. Replace the shocks and/or tub support springs if they are broken. If

...done all cloths are tangled when empty tub you can spin tub and you can hear water below tub the washer has a balance ring that hold water that is ok. as of the tangleing you may have a low water ...

tub seal. Take the two phillips head screws out of the front cover located low on the cover lift forward and remove. Set the machine two low level and fill with water only no soap or clothes when unit

...tub doesn't fill up! I am in Zambia for another week - would like to see if I can fix it before I return to the states Try lifting the drain outlet hose higher, as it sounds like it is syphoning due ...

...low water pressure at the time. How did tub fill if everything was off? The wall mounted valves were not turned off. Drained tub by setting spin cycle on. Have everything off at this time. Thanks for ...

...tub stopping once spin cycle is done. Slow, low grinding. Is there some sort of brake that stops the tub from spinning? un plug power cord from mains socket and open the door , inspect every part , ...

will stay in tub on a hi efficiency washer. That's why the water level is very low also-high efficiency,low water use. Most LG washers have an extra water button to add a small level of water per wash