GE WDSR2080D Top Load Washer "outflow pipe" Questions

...outflow pipe from the u-bend under the sink, first check that the end of the outflow pipe is not blocked, then check the u-bend for blockages. If these are both clear then the pump itself may have a ...

outflow pipe attached to the sump (or u-bend) with a bowl or pot handy (because of excess water), take the pipe off of the sump and check for blockages. Then if you can check the u-bend too and see if

...outflow pipe is clear of blockages. Look under the sink where the outflow pipe attaches to the ubend and with a pot handy to catch any water remove the pipe and check to see if any hair/fluff etc is ...

...On whitegoods.co.uk all machine faults are explained. Error codes can be quite vague and f20 could mean your pump has stopped functioning, you outflow pipe is kinked or you have an internal

...with debris Ideally you need to remove the pump and outflow pipes and flush them out. Also check the pipe between the drum and pump for a blockage. Back flush the outlet pipe from your hot water

...outflow pipe is not blocked. Turn off power supply get a bucket ready, disconnect the outflow pipe from the u-bend under the sink and check that it is not blocked. We had the same problem but had to ...

...outflow hose directly into plumbing under sink... since then the water is outflowing as soon as it is inflowing??? call your "handyman" back ..he has created a siphoning problem either drain is too ...

outflow pipe, get a bucket ready to catch any excess water and remove the outflow pipe from the sump to check if there is any blockages. I hope this helps http://www.fixya.com/support/r385844-checking

...problem with the washer, your problem is the pipes have a build up in the that is restricting the outflow of the water. This happened to me and I replaced the

...are still soaked is the machine is spinning and draining check that the pump or outflow pipe is not blocked. make sure the drum is spinning. Also you may want to make sure the pump is not