GE WDSR2080D Top Load Washer "lowes fill valves" Questions

...in the display Hotpoint ultima, fills with water then stops with H2O flashing in the display Check water inlet valve (valves) for no fill or low water pressure. Please rate my suggestion.

GE washer keeps filling with water. GE washer keeps filling with cold water... even when unplugged. I can only stop it by turning off the cold water. Please help. It sounds like you have a bad fill ...

My 7kg Electrolux front load washer keeps stopping from between 1 to 14 minutes before it finishes. I have to keep coming in to press restart button. It keeps saying ERR 10. What does this mean? ...

Maytag washer fills slowly. Maytag washer fills slowly and most of the time the water just drips out when filling. Hoses and screens were checked. Inlet valves have been replaced twice and this did ...

...and fill hoses jump and rattle. Any ideas about why that should happen now. YOU CAN GO TO LOWES IN THE PLUMBING SECTION AND BUY A PRESSURE RELEASE FOR THAT PROBLEM. JUST ASK THE LOWES PLUMBING ...

...fill and drain simultaneously. This can also cause the problem. First if the washer is not getting any water, then check your shut-off valves and the hoses. Disconnect the hoses from the washer and ...

wont fill with water washer makes the click sound but then the water does not fill up just makes a low humming noise Check the hose filters, open the valve with the hose disconnected to make sure you ...

water continues to fill and overflows 1.Drain hose is too low. Minimum 30 inches from the floor.2.Water fill valve is defective. If it fills with timer set to OFF,replace the water fill valve. 3. The ...

fill if everything was off? The wall mounted valves were not turned off. Drained tub by setting spin cycle on. Have everything off at this time. Thanks for some help. Could be sediment build up in the