...low level, the water never stops filling! Help - can I fix this problem at hime myself? The water is siphoning out as it fills. Your drain hose is too low or has a air block. Remove the drain hose ...
Question about Washing Machines
...low water pressure...the cycle always begins but the water level is no where near high enough. Can the cycle for fill be increased? We have checked and cleaned the inlet filters etc, it is just that ...
...Water fill seems low When running the washer, the fill levels appear to be low. Is there a recommended fill level that should be reached (inches)? At the "small load" setting there is 4" of water in ...
Question about Kenmore Washing Machines
...low water level! Washer only has low water level in all wash settings. If the water levels are low in your washing machine then you could have a sensor that is faulty . The fill sensor will ...
Question about Hotpoint Washing Machines
...water beyond low when I've used the large capacity to wash? It can be due to a faulty water level sensor which evidently is a pressure switch. If the diaphragm is damaged it will require a ...
...and overflows you need to check the water level switch and hose. If it keeps filling but doesn't leak out the you drain hose is too low or too far down the drain. thanks mate my drain hose was too ...
...using auto fill mode?if u r then try selecting high medium or low. check water pressure coming out of inlet hose, could b faulty valve not letting enough pressure thru.please reply if u need more ...
...low water pressure, slow or continuous fill.All washers are designed to operate with a water supply pressure of 20-100 PSI. When the pressure drops below 20 PSI the washer can have the following ...
...Water just keeps on running.Tried to fill up on low, medium and high to no avail. Good day, If it keeps filling, and can't then it sounds as if you have the drain hose positioned too low. It must ...
Question about Electrolux Washing Machines
...PCB faulty. E13 - Drain tube improperly positioned; Water pressure too low; Water fill solenoid valve is faulty; Water circuit on pressure switch is leaking/clogged; Pressure switch faulty. ...
401 questions posted
Usually answered in minutes!
992 Questions
874 Questions
371 Questions
398 Questions
255 Questions