990 And 950 Responder SST Remote - 7701P "set alarm valet mode" Questions

...set the alarm and not I cannot get the alarm off (disarmed) and the alarm keeps going off. Help? Locate the valet/override switch (button), (if you can't locate it, try tracing the wires under the ...

...alarm worked fine then 3clicks from the "brain" and now the L.E.Dstays on and there is no sound or indicator flashes when using fob to open car,fob still unlocks and locks the car Your ...

...set the alarm to Valle and can not reset it and cannot locate where the valle button was installed in my 2002 F150 with the door open and dome lights on, lock, unlock, lock with the remote. this ...

...alarm is only set when I set it myself manually with the remote. There is absolutely no information in the manual about how to do this. Help! Ok, try this. Put the key in the ignition, and turn ...

...Alarm system. I purchased my Toyota used about a year ago and I can not get the light on the dash to go off. I replaced the batteries in the key ring on both sets but it still does not lock or unlock ...

...alarm to set.The light thats mounted on the dash stays on but does not flash. It worked when I had it installed, but I think I hit something on the remote that caused this problem. The switch that ...

alarm is set to passive arming and, once you disarm it, it immediately begins the arming process and it is not registering the door being open. I'm going to go out on a limb and say that the alarm

...to know your 2way responder.... GOOD LUCK AND PLS RATE THIS POST FIXYA!!!!! sounds like the alarm is in valet mode. to get out just open a door, then lock, unlock, lock on the remote. should be

...otherwise consult the manufacturer's website. The last one I did only required setting the car starter/alarm to program mode using a hidden "valet" switch, then just a quick sync instruction