rough ground.. also sputters when you shake the tractor.. all interlocks have been bypassed as i thought this was the problem. fuel cut solenoid replaced with bolt.. carb off and cleaned many times...
rough cut 14.5 hp Changing the belt on the swisher 44' rough cut - mine is a model RTB134412v. You have to remove the belt guard (4 bolts) and then the 6 bolts holding the engine on to the deck. Lift
on a level surface the ride is smooth, however when i attempt to go uo a slight incline the ride is rough. Why? It could be fuel related when you incline. Either not enough gas in tank or float is not
Question about Garden
...cut the grass lower When on level one it cuts slow. Level two cuts a little more. Level three and up you can hear the blades turning strong Tighten or replace drive belt. Before you do that though, ...
...cut off. When i restart the engine starts hunting and running rough. have replaced carb and fuel pump. cub cadet brand sounds like the gas is bad, drain tank, refill will known good gas. You may want ...
i have to close the choke for it to stay running it run rough your cutting the air flow off to the carburetor allowing more fuel in, check all fuel lines, and filters, and fuel pump if you have one. ...
...rough last fall, so I took it in and they cleaned the carb, changed oil, checked belts, tune up, etc. it was running great, a loud "whoosh" sound when engaging the blade and cut really well. After a ...
I have a 19.5 HP Craftsman 42" riding lawnmower while cutting tall grass it started running rough. Checked plug it was black replaced plug started engine still ran rough then died and will not start. ...
Question about Craftsman Garden
...m trying to figure out. One is it's a little slow to start. Once it does start it runs a little rough while idling. Once I put it in gear it runs smoother for a wh couple of problems that ...
42 questions posted
Usually answered in minutes!
48 Questions
40 Questions
40 Questions
8 Questions
6 Questions