...Remove belt cover. (Located in back of the discharge shute). 3. Pull the traction drive belt idler pulley arm (See Figure 24) away from the belt to relieve tension, and slide the belt off the engine ...
...remove the mower deck. There is no easy way to replace the belt, however. It runs from the transaxle at the rear to the engine at the front, around idlers. Let me know if you would like assistance in ...
...tow lever is not pulled out,rear of machine by tow hitch.Also pull rubber caps off of both axle ends to see if one the axles is turning free inside of rim,if so remove wheel and replace axle
...Replace all fluids as necessary. Hi, remove the battery and tray for access. Also remove shifter cover for access to the tension pulley to remove the small drive belt, from there releave tension and ...
remove pully replace keyway reinstall You might have a worn engine pulley. You can manually adjust the drive belt tension by pulling back on the left foot pedal. This worked on mine and is a sign that
replace. If you go to John Deere parts and do a search for your tractor, in the parts listing it gives a pretty clear picture of the routing and configuration of the belt as it should go on, you might
...traction near the belts. You may need to tip the unit on it's nose to remove access panel to expose mechanisms. Also the inspection cover over the belts in front of the engine may help identify the ...
...traction belt. A. Chamfer edge after grinding/machining. B. Remove 1/8?. C. Masking tape used as a reference line. 8. With the engine off, engage both the traction and auger levers and inspect the ...
1,561 questions posted
Usually answered in minutes!
111 Questions
134 Questions
104 Questions
149 Questions
88 Questions