shop vac pump and both hoses turn on to see if pump motor runs I had the same issue with mine and the coil windings for the pump out motor had rubbed though. I unwound it a little and re crimped a new
...shop vac and suck out the water from the drain hose,get it as close to the floor as you can and it will work better,then remove the center part of the pump,the clean out and see if it's filled with ...
shop vac remove the water from the tub,then when you get to the pump try separate the hose from the pump just enough so you can vac out the water slowly so you don't have a mess,then vac out the hoses
...shop vac turned on and at the bottom of the cap you are unscrewing, it will **** up all the water draining out with little to no mess. I just tried the technique above after having the same problem ...
...a shop vac attach it to the drain hose to **** out all the water then pull the hoses of the drain pump and look inside for something stopping the pump if there is nothing found replace the drain ...
shop vac or a large mop for this operation lol if you have a shop vac turn it on wet pick up take the drain hose out of the drain pipe and open the door so you can hear then vacum all the water out of
...shop vac,vac out the water,remove the bottom panel,on some models the center of the pump twists out,loosen the center piece until water starts to leak out,vac up the water until it stops,remove the ...
Question about Hotpoint Washing Machines
...shop vac vac out all the water out of the tub,then remove the front panel with a putty knife and with a pair of pliers remove the hoses off the pump,try to wiggle the hose so the water drains out ...
shop vac vac out all the water in the tub,then turn the filter counter clockwise and when the water starts coming out slowly vac it up until all the water is drained,remove the filter and clean it out
23 questions posted
Usually answered in minutes!
522 Questions
457 Questions
351 Questions
272 Questions
222 Questions