Question about Bosch Washing Machines
...working before a spin cycle, and the water was not draining away. I think it might be the filter is blocked, but I can't get the filter out. How is it supposed to come out? Is this the problem, or is ...
...remove this nut in order to remove the spining cilinder, to clean it. I am affraid to apply "brute force" to the nut (like using an impact wrench). Is it safe? Thanks I would try a
Question about Maytag Washing Machines
...get it loose and removed try and insert it in a way it doesnt get stuck and goes in and out freely Brute strength, there is no other way. The detergent drawer is in a sealed unit _sometimes_ they ...
Question about Whirlpool Washing Machines
...brute force require to press the top back down into place (and slow the RUST). Your average PROFESSIONAL would just walk up and rip the top open with a giant tug... Most times that will work... but ...
Question about Bosch Washing Machines
...at most 1/4 of a way counter clockwise. It was definitely a hard stop and we didn't want to use brute force as we heard it would potentially break the cap. We found a solution! If you happen to
brute force, pliers and lots of wiggling back and fore. When we eventually got it out, about a pounds worth of small change and lots of gunk blocking the way. Spin now working, f05 gone. Very happy as
23 questions posted
Usually answered in minutes!
522 Questions
457 Questions
351 Questions
272 Questions
222 Questions
