Bosch WFLI 2440 Front Load Washer "brute" Questions

The filter is stuck and won't budge and its also blocked Brute force is the answer. Use a large pair of players or similar and it will come. Careful because if machine has not drained you will get ...

...on the outside of the agitator. Once removed agitator slides upwards off the drive spline. Gentle brute force may be

how to put back clamps on after taking them off for other repairs a bit of brute force. slide straight end of clamp into slot and the hook type end quite literally you've either got to put screwdriver

...still seems screwed in. Are there any other screws (eg inside?) I need to find, or do I need to brute force it? Thanks, Please give model ...

...stuck Code shows F - 05 but cannot unscrew front filter cap it is completely stuck? We had to use brute force, pliers and lots of wiggling back and fore. When we eventually got it out, about a ...

...not lisning to my wife and buying a new one Adjust the motor mount so the pulleys are aligned. Brute force may be necessary. Thanks for using FixYa - a 4 THUMBS rating is appreciated for ...

...Any help would be appreciated. Unlikely that the back feet are adjustable.Sounds like a bit of brute force is needed. Adjust the front to the maximum height Try with a torch and mirror first to ...

...as nowadays stretchy belts are used in order to avoid motor adjustment. fitting requires some brute force. the way i do it is to put the belt on the motor pulley then start it as much as i can ...

...for any wrench. What is the best way to get it off to apply a hose for hot water use? Unfortunately Brute Force is you only option, get hold of a pair of Slip Jaw pliers, these will allow you to get ...

I have a sheet stuck under the agitator of my GE gtwn3000mws. I've tried to use leverage to brute force the agitator out and it was a no go. Then I took off the top cup looking for the bolt to r I