Question about Whirlpool Washing Machines
rear shocks whirlpool duet GHW9200LQ front loading washer How do I remove the shocks on this washer? I need to replace the left rear shock if you are facing the machine. I cannot figure out how the ...
How to know if Shocks are bad I see alot of movement in drum on medium to heavy loads. Visual inspection shows no spatter, like from blow bearings. how do you know if shocks are worn and need ...
Shock absorbers are broken How do I replace the shock absorbers in the washer. just buy the new shocks(should by pair)I know they had 2 way one they have pin anoter kind they have clip lock to the ...
Question about Frigidaire Washing Machines
Testing shocks on a front load washer. the washer bangs on spin and rubs like metel on metel, the tub is now uneven and I can't use it. Can someone tell me, how to tell if shocks on a wirlpool due
Question about Frigidaire Washing Machines
Frigidaire gltf1670a front load washer not agitating or spinning. Can my broken shocks have anything to do with that? not agitating, not spinning, and shocks are broken Your broken shocks could have ...
frequent out of balance problem model no. ghw9150pw1 All front-load washing machines have shock absorbers that are used to dampen the tub movement in the spin cycle. The shock absorbers or struts are ...
Question about Asko Washing Machines
...buy a new one? I think is is this model purchased in 1991 with the pull down door on the front. HAS SHOCK ABSORBERS WHEN THEY GO BAD ONE SIDE CAN LEAN ALSO CHECK FOR BAD OR LOOSE BALANCE WEIGHT. ...
WHAT DO I NEED FOR TOOLS TO REPLACE A SET OF FRONT SHOCKS ON A NEPTUNE TL? Assuming you've already removed the front panel. Tilt the front of the machine back and place a 4x4 or similar size block ...
replace shock Hi, We have a 2 years old Kenmore HE2 (46462). I think the shocks are goner. The spin cycle shakes really bad. How easy is it to replace the shocks? Do I need to remove the drum and rest
Question about Washing Machines
...washer hits the side of the machine, cause it to move. I've opened up the machine to look at the shock absorbers and springs. Springs look fine and so do the shock absorbers, they just seem to
675 questions posted
Usually answered in minutes!
457 Questions
351 Questions
272 Questions
222 Questions
251 Questions