Husqvarna Craftsman 36cc, 16 In. Gas Chain Saw "gap ignition chainsaw" Questions

ignition module. Check the module pole gap to the flywheel magnets with a thin business card for a gauge. If the gap is excessive, that can give a weak spark. If the gap appears to be correct, then it

When replacing the ignition module, what is the proper gap setting between the ignition module plates and the magnets in the rotor? The air gap should be 0.3mm

ignition coil,points, condenser and spark plug. still get no spark, even with the shut off wire unhooked Hello, There are 2 items that you need to pay close attention to is the air gaps; 1. Air gap of

...Mac 3200 Here's a link to a free manual. Free McCulloch Chainsaw User Manuals ManualsOnline com 0.010in to 0.015in. if air gap your referring to Is distance between flywheel and ignition ...

...chainsaw. I would like to know the resistance value between spark plug wire and blue wire from ignition coil, and between spark plug wire and the ground and finally resistance between blue wire and ...

Ignition coil gap: An index or business card is a good gap tool. Remove the plug, rotate until magnetic attraction pulls coil and card tight to flywheel, tighten the coil screws. Rotate flywheel until

...gap between the ignition module and flywheel on a craftsman chainsaw? Are all saws the same? rebuilt carb, new ignition module, new plug,but no spark. is there a "gap" between the ignition ...

...No Spark, apart from the obvious- is it switched on, try a new spark plug, check the ignition- check wiring- earth connections, check the gap between the flywheel and the ignition What saw is

...ignition module pole gap to the flywheel. Rotate the flywheel magnets under the ignition module poles, and use a thin business card for a gauge. With the card in place, loosen the module screws and ...

gap. Make sure ignition switch is on. If still nothing, remove the cover from the flywheel. Set the ignition module gap by using a thin business card between the module poles and the flywheel magnets.