Cuisinart DLC-5 Food Processor "won turn" Questions

I am missing blades and slicers for a 3000 series.Do you stock these cannot release bowl, tried turning to release won`t turn!

...turn. Motor start capacitor has failed. If If the blade won't start turning on it's own, it's probably the start motor capacitator. Mine did the same thing. I found one for $5 at a small ...

...won’t Turn on, I have checked the fuse and changed it and it is dead. Do you you think it is the motor ? And is it expensive to fix. Hi, if it is the motor, (sounds like) then yes it is expensive to ...

...won’t turn on even when put together. Just opened and never been used. Read the handbook and make certain you are assembling the bowl, lid and pusher correctly, they can all play a part in activating ...

...instructions several times like the book shows but still won't turn on. Model # need help getting my food processor to work Make sure the bowl is locked in properly. That is the normal

...won't turn on wont turn on DYI fix job on mine. DIsassembles base and switch assembly. Added a rectangular piece of plastic just above litlle balck trigger switch. Taped switch casing's side (not ...

won;t turn either at least without force and I don't want to break it. On page 8 of the manual that I will give you the link to: leave the cover in place on the container. Use the cover to help remove

...won't turn off. Plug in and it is on. try taking the lid off . For cuisinart food processors that won't shut off: with bowl off - not attached - hold OFF button down while plugging in. With a ...

...won’t turn on the Handel clicks in ok so I’m not sure what the problem is it’s only been used a couple of times hope you can help me thank you Christine If your Magimix food processor won't turn on ...

...first use and won’t turn on Make sure you have the bowl, lid and sometimes the pusher assembled correctly. If everything is not correct it will not activate the safety switch to allow it to start