How do I wire the RCO410 into my maytag fridge? I am having difficulty correctly wiring the RCO410. look at the wiring on the relay, then if you have a techumseh compresser the top terminal is common ...
Question about Kenmore Refrigerators
...parts for this unit are NLA. Go to the appliance parts store and purchase a 3n1 start relay number RCO410 and install this universal
...to start you need a 3 in 1 kit which is the overload and the relay its 20 dollars part number rco410 i think its that hundred percent sure very easy to install very very if got questions feel ...
...be replaced? the clicking is the compressor overload tripping. you can try a relay kit part number RCO410 available at any appliance parts supplier. this replaces the relay, overload and start ...
...The part number is RCO410 Please rate this solution and good
...compressor.If the reading is over 5, you have a bad compressor. You may be able to get by with a RCO410 three in one
...out the compresser idf you dont have a meter you can install a start kit like a Supco Pro41 or a RCO410 or a factory replacement and see if it starts up the compresser.. Have you cleaned the ...
Modal # 253.748724400 Compresser comes on 5 seconds then cuts off, not cooling at all. check the start device. a supco rco410 3n1 will replace it
CAN A CAPACITOR BE HOOKED UP TO A RCO410 POWER START RELAY THE ORIGINAL RELAY HA A CAPACITOR HOOKED INTO IT, I TRIED THE RCO410 RELAY AS SUGGESTED, IT RAN FOR AWHILE THEN STOPPED, EVERYTHING ELSE ...
...i promise,. here is a link http://www.ebay.com/itm/Hard-Start-Kit-Relay-Capacitor-Overload-ERP410-RCO410-HS410-WRX-4-/140821632778?pt=LH_DefaultDomain_0&hash=item20c99f970ai hope this
733 questions posted
Usually answered in minutes!
1,239 Questions
824 Questions
625 Questions
507 Questions