... Not get a complete flush, unless I hold down the flush handle. Should not have to hold down handle right? Unit is brand new. lift off cover and adjust =shorten length= between flapper and handle ...
Question about Crane Plumbing Home
hold the handle down until almost all water is out of the bowl. adjust the flappers-- either adjust the length of the lift line-from flapper to handle and or the flapper itself not properly mounted on
...down. Can I spray WD 40 on the handle? It sounds like the nylon nut which holds the handle in place is too tight. Try loosening that nylon nut just a little to see if the handle moves easier. ...
...have to hold down the handle on the commode till flushing is completely done. Do I need a new commode? Mines pretty old. No you just need a new flapper for your flush valve. Its just a 2 minute
...hold down the handle to even get it to flush at all. you either have the wrong flapper or it is not adjusted right try moving the chain to shorter or longer lenght the other thing to check is that ...
...and we are quite disappointed. Arnold For now, just hold the handle down until everything goes down, common problem with low water use toilets, You may want to take this unit back and get another
handle)up after the down motion to make it function properly. I had this issue as well with my toilet. My chain was unattached and had been sucked down the drain under the stopper valve preventing the
hold the flush handle down for several HAve to hold the flush handle down on the Toto for several seconds to make the toilet completely flush? change and or adjust the flapper valve if the chain is to
11 questions posted
Usually answered in minutes!
80 Questions
45 Questions
41 Questions
21 Questions