KitchenAid K45SS Classic Stand Mixer "stuck speed control" Questions

...stuck on the "10" speed and it will not budge. The mixer works fine, but I cannot use the speed/mixing controls anymore unless it is for high-speed mixing. I cannot plug in the mixer unless I am ...

...speed. Moving the lever has no effect on the speed. Speed control plate at the back is stuck in the high position or you need a new phase board. That's the small PCB under the back cover at the

...Speed control knob on my standing mixer is stuck. it will not go back to reset. it will go to 10 but does not turn on. It is most likely a stuck control assembly item #8part #9703609 in the following ...

...a near new Kambrook Powermix. Tonight the knob that controls beater speed broke and speed is stuck on high. How can I fix this? Obvious answer I'm sure, but you'll have to replace the speed ...

...stuck on one speed - fast! I have a sunbeam model A12 (approx 1964) and it has never missed a beat, has had regular services and has now become stuck on the highest speed. There are very few ...

...stuck The speed control is locked? Hiya, Sorry you are experiencing an issue with your appliance. We have some help videos to assist you with resolving this issue. Please see one of the links below ...

...speed control is stuck on 10, so I have to use the plug as the on/off for my now one-speed mixer. It still works, but I cannot adjust the speed or turn it off without unplugging it. Is there a lock ...

...stuck on 10 Is speed lever literally stuck and can not be moved or is the motor speed always on high? The two have separate solutions. The easy one is the stuck lever. Open the mixer up and see what ...

...stuck accelerator. When set on 'stir' or any of the low-speed settings, the RPMs increase rapidly, then the motor shuts off. Sounds like the speed control, easy to replace and the model is on the ...

...stuck on high speed. Capacitor was shorted. Replaced with Radio Shack 0.1uF 250V. Worked fine after that, till it started sounding weird. Watched it run with cover off and observed the arcing and see ...