KitchenAid K45SS Classic Stand Mixer "stuck brush" Questions

...stuck in the brush holders. I suspect this is the reason the motor stopped working as the brushes have worn and being stuck, they are no longer contacting the armature. The spring has come off one of ...

...brush stuck in kitchen aid mixer We have a realtively new mixer, 3 years old but maybe only used 5 or 6 times that completely died (no motor at all, so not worm gear). I figured before sendign ti for ...

...stuck. One of the had pieces of what I think is carbon off the brush. It did not run at first aqnd then it ran intemittantly. Now it will not run at all. I normally CAREFULLY drill a small hole thru ...

...brush? how can i fix it? the brushes are not square, but have one corner cut off. use a flashlight to see which direction the brushes must be put back. clean the ends of them well with a cotton cloth ...

...stuck brush you need to clean up the hole with a small file, again CAREFULLY so you do not mark the commutator. Also when filing be aware of the blocking corner at the bottom that lines up with the ...

brushes stuck, afraid i put them back in wrong. now they wont come back out with the spring when i take the black plug out. no power when i turn on the switch. you can access the brushes from inside ...

...stuck brush/spring, then scraped around the inside to remove sticky debris. Also, I used a utility knife and gently shaved the sides of the block, so they'd slide more easily. After a few tests ...

...stuck brush will usually work. drill a little way in and stop the drill, now pull out and the brush should come out with the drill bit. You may ahve to do it once or twice to get the brush ...

...brush. How do I reach in and pull it out? depending on how deep and how stuck it is there is a possible way to pull it out; add a tiny dot of crazy glue to the end of a wooden skewer or chopstick and ...

The brushes are stuck inside the k45ss model how is the best way to remove? Look for screws that hold the brush brackets down.