KitchenAid K45SS Classic Stand Mixer "speed fast" Questions

...fast to use, when I turn the speed up it goes faster still, but it will not run slow a s it used to. It's a problem with tachogenerator. You can buy this part pretty cheap and replacing is not that ...

...changing to 8-10, speed stays the same. Sometimes can be caused by running too fast on the lower speeds. Should be 13 to 15 revolutions in 15 seconds on speed 1 then a slight increase only on speed

...fast (about 4) and then someitme slows down (to 1) You can try adjusting the speed control as shown in section 6 of the service manual: ...

What is the rpm of artisan 300watts On low speed roughly 1 rotation of the planetary per second. On high speed it should be the maximum speed that motor can run at, too fast to count that's for sure.

speed fluctuates; is too fast on low gear I'm trying to fix a Kitchenaid K45SS. The slow gear runs way too fast, and when on the slower gear the speed fluctuates. Is it likely to be a problem with the

fast at the lowest speed. I tried checking the sensor as some have suggested but is still goes really fast. It's only been used a few times. Is there another area that controls the speed? Hi. Goto www

speed. There was no changed! I still have 10 speeds that are two fast! As far as I can tell there is nothing else to replace or adjust. Have no idea what to try next. Any suggestions? the mixing speed

goes too fast...one speed only..fast! Probably needs a new phase board, that's the small PCB under the back cover at the top with all the wires coming out of it.

...speed the mixer speeds fast and slow making it impossible to mix with any control. You can get the high speed back if you want to play with those three screws. there is a timing scheme for your mixer ...

...fast speed ? If it is running too fast at start on low speed there are 2 likely causes. The speed control plate or the low speed stop screw are out of adjustment. If this problem happened instantly ...