KitchenAid K45SS Classic Stand Mixer "speed control board" Questions

speed control plate and a governor for speed control. the governor rarely goes out the phase control board is a likely culprit but the system would work only in high gear if it was

speed control of the mixer1 speed control board adjust speed screws2 speed Phase control board, needs replacing3 The motor governor behind the speed control board needs replacingSpeed board

speed control board. There is a primitive switch there operated by a shaft from your speed control lever. You may find the switch is not activating until it gets right up to speed 10. Have you checked

...speed control board is stuck The switch on the phase control board/speed control board on my KitchenAid Classic Stand Mixer (max watt 250) is stuck on the "10" speed and it will not budge. The mixer ...

...speed control is not working. Is this a common problem? the triac solid-state component on the board for the motor speed control is shorted and you need a new control board, unless you can find an ...

speed control pcb and a speed sensor involved, it's not mechanical like the other old models. Best you contact Kitchen Aid and find out where your closest authorised service agent is. Sandy, It sounds

speed until I finally cracked the control board. Since I had to order a new part and the mixer is old I decided to replace everything (control board, phase board and governor) to ensure that all parts

speed control board/selector knob. Since the machine was free to me, I opened the mixer to examine the speed control circuit board & wires. There doesn't seem to be any damage. After some effort, I've

...speed control board are not loose and have not been messed about with the most likely solution will be to replace the phase board. That's the little PCB just above the speed control board with the 6 ...

...speed control problem when you trurn the speed knob a little way the mixer accelerates to top speed then slows to approx 30% speed, then you can adjust the speed. I have already replaced the main pcb ...