KitchenAid K45SS Classic Stand Mixer "mixer turn" Questions

...turn when mixer is turned on. No problems with motor. Beaters are in correct positions and properly turning. Turntable just does not turn. Mixer has worked great and had no problems. Just suddenly ...

...turn the mixer on, the motor hums but the mixer will not turn. I hope this is a safety mechanism and there is a way to reset the mixer. HELP!!! there is gear damage inside unit. will need disassembly ...

...pin into the hole Now turn the mixer on its side and look for the screw in the mixer casting. Turn it clockwise until tight and the pin will not come out again . . . . for a longer time hopefully .

...power is available at the outlet with other products yet the mixer does not turn on. Any ideas? If you raise the mixer arm you will expose a reset button that may have been tripped. Cheers, ...

...in the rear of the mixer head. if you turn the mixer around you will see it in the band. remove that screw then remove the other four screws that hold the top on the motor cover. good luck with

...turn on the mixer it produces a squeaking sound and the higher the speed the louder it gets FYI this is brand new out of the box Hi. These mixers normaly make a lot of noise when in operation. Go to ...

...when turned on but nothing turns. i can turn beaters by hand all pullys are free. the mixer was just moved and was laid on its side during move. Sounds like its needs a start capacitor on the

mixer, turned off to add an ingredient and it wouldn't turn back on. gears turn by hand, brushes look OK and i see no loose broken burnt wires or components. Mixer obviously has a short in wire, motor

...mixer. turn the screw counter-clockwise about 1 turn, try the mixer and see if it still does it. if it does then turn the screw another 1 turn etc. until the scraping stops. hope this helps :) from ...

...mixer does not turn on the problem might be a lack of electrical power, broken wires or a failed motor or control problems. First, check the outlet's GCFI breaker and reset it if it's tripped. If the ...