Question about Blenders
...motor base, the blades do not turn. One of the parts is not being driven properly. Either the clutch on the top of the motor is not really attached to the motor shaft OR the clutch on the bottom of ...
...on hums Does the blade turn by hand? Does the motor turn by hand? The answers to both those questions may point you in the right direction. If both turn freely I would suspect you need a new
...motor. Turn off and unplug the unit. Plug in the unit and turn the motor on again to clear the over-load condition. Check the blender jar for blockage. If overload condition re-occurs, contact your ...
...turn the motor comes on but the blades won't turn As stated earlier it could be the shaft needs lubing, remove the bottom part of the blender blade... the rubber thing that engages on the ...
Question about Vitamix Blenders
...is locking up and in turn the motor of the base has to work harder. You will need a special wrench to get off the blade and replace the assembly. I would start there. Check this out: Vitamix ...
...4mm hole in edge of coupling Put screwdriver into hole on a large angle and whack the handle to undo the coupling. You are whacking it to turn in the same direction it turns when the motor is
...motor won't turn on. The fuse has to be physically replaced to fix it, and unfortunately will probably blow again. I'm dealing with a similar issue. I was making a batch of hummus, I fear that the ...
...motor won't turn on Using the Kitchenaid blender (model KSB85) and the motor just turned off. Now power to the unit won't even come on. I'm pretty handy, can I replace motor? Have you tried the fuse ...
...4mm hole in edge of coupling Put screwdriver into hole on a large angle and whack the handle to undo the coupling. You are whacking it to turn in the same direction it turns when the motor is
Question about Back to Basics Blenders
Motor turns but the blade fails to turn gears and blade turns when there is nothing in blender. but when I try to blend anything in it, the motor turns and the blade is stationary. Is this repairable.
187 questions posted
Usually answered in minutes!
1 Questions