...mil dot - dots do not agree with what they should be according to the detailed info that BSA sent me , nor does it agree with what i have read on the internet about mil-dot ranging. the mil dot ...
...Mil Dots and rangefinding. When you look through the scope you should see 5 mil dots on each axis, your scope may have broad lines taking place of the 5th mil dot if it is a "modified" mil dot scope. ...
at what power do you need the scope set at for the the mills to be 3.5 at 100 yards. On my tasco its 8x but I imagine each manufacture is not the same. It is a BSA 6-24x 40 illuminated Mil-Dot 3.6 at ...
Son just bought me a Bushnell Banner Dusk&Dawn 4 Plex, Mil-dot, 3-9x50E. Just looking for an explanation on all the marking on the reticle (inside of the scope) I understand the cross hairs and ...
...mil dots? no it dont but it would be far better if you test fired your gun till you could shoot by gessing the hold over/hold under anf forget about the bam silly mil dots they will only be right on ...
cross hair broken on my B S A mil dot 4-16 x 40 scope will any gun shop be able to repair Yes, more than likely. The scope just needs to be disassembled and the crosshair flange repaired or replaced. ...
At what power is the 6x24 banner set up for the mil-dot? The cross hairs don't change with magnification. No matter what you set the power on, the mil dot doesn't change, until you move the cross ...
i need an instruction manual for my barska 4-16 x 50 mil dot scope. barska product code ac11002 HOW CAN I GET THE FRONT HOOD OFF OF MY BARSKA RIFE SCOPE.
mil dots) (you need to know how many mil dots your hash marks are in your scope) equals range. Then you can use your formula or "cheat sheet" to set windage and elevation for said shot, then factor in
Need to know what power that mil-ing targets needs to happen According to the manual VAR624X42M is calibrated at 8x.
34 questions posted
Usually answered in minutes!
85 Questions
80 Questions
41 Questions