Your boat does have a Main Shore Power Disconnect Circuit Breaker. You will need to remove an access panel on the inside of the boat in the general vicinity to where the power cable connects to the boat. Not knowing the specifics of your boat, chances are it will be around a cabinet or fixed seat. If you know where the fuse panel is on the inside, you could remove a panel next to it to follow the 120VAC cables (which will be a much larger gauge and only Black & White where the 12VDC wires may have multiple colors and whites). Be prepared, this area is typically inconvenient and not the easiest to get into for some of us. Depending on your application, the switch may be a red handle that will rotate.
Once you find it and switch it, you should have power. If not, use a multimeter to check for power on both sides of the switch.
156 views
Usually answered in minutes!
×