20 Most Recent Holiday Rambler 2010 Mintaro 26RKS Questions & Answers


Should have the basic schematic in your owner's manual. If not, contact the mfg and see if you can download one or have it mailed.

No luck? Google it. If persistent enough, you can find one.

Holiday Rambler... | Answered on Oct 16, 2019


the fridge should be on its own outlet if breaker on check fuse for 120 volt on board in back if blown possible bad heater element or board

Holiday Rambler... | Answered on Oct 19, 2019


Holiday Rambler would be a possible source.

Holiday Rambler... | Answered on Sep 17, 2019


I am going to TRY to help you... I think you are looking for this? GO to GOOGLE and search for:

Holiday Rambler Aluma Lite 2012 and SELECT VIDEOS!!
http://www.google.com/search?q=Holiday+Rambler+Aluma+Lite+2012&newwindow=1&rlz=1C1SQJL_enUS845US845&source=lnms&tbm=vid&sa=X&ved=0ahUKEwjwu73Dt6TiAhXqGDQIHe_zCnEQ_AUIECgD&biw=1920&bih=975


I hope this helps you!
Anthony

Holiday Rambler... | Answered on May 18, 2019


contact ers insurance they were in the alarm discount scheme in 88 they will put in touch with dealer who will help you, also yje monitor should opperate automaticaly when ignition is on there is a remote for it pound shop all in one remote will do it look for decca or hinari tv models on the search.

Holiday Rambler... | Answered on Jan 17, 2019


Many of these are located under the OHC (over head cabinet) around the center of the area. I have seen where some are flush it sunken under, some are just on the surface itself. Generally, heaters will use the thermostat located in the main living area, dining room table or couch and it should be at should height or higher. Since heat rises, more ideal and energy conservative. Use a good flashlight, being specific for corners and tight spaces.
20181216_202044-nffcmmau4i3xb3icaabyn4l1-2-0.jpg Most sub surface or flush sensors will be smaller but usually have a similar size sensor, around 8-10 mm or 3/8" so these are smaller than what I am showing you in the picture, in which the sensor is located in the middle of this type.

If you think you may have found it but not sure, a trick to try is using a hair dryer on the area while another person observers the thermostat to look for temperature changes. Easy to watch on digital, need to remove cover and observe the level or bar movement when heated.

For your unit having only the L/M/H switch, the sensor may be around the location of the switch or in close proximity to the heat output

Holiday Rambler... | Answered on Dec 17, 2018


Go to a clock repair shop. They should be able to get you one.

Holiday Rambler... | Answered on Nov 23, 2018


The only '99 HR Imperial I've seen has a Roadmaster chassis.They typically have a solid front axle, but a quick look under the front can verify if it has independent front suspension or not.

Holiday Rambler... | Answered on Nov 20, 2018


Ull need a shopbook..may havum in dealr. Theres a general maint by peterson in library or bookstor

Holiday Rambler... | Answered on Nov 08, 2018


Should have a screw on piece on the outside...

Thanks D


Holiday Rambler... | Answered on Nov 07, 2018

Not finding what you are looking for?
Holiday Rambler 2010 Mintaro 26RKS Logo

2 questions posted

Ask a Question

Usually answered in minutes!

Top Holiday Rambler RVs Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Lisa
Lisa

Level 2 Expert

101 Answers

bflinn181

Level 2 Expert

112 Answers

Are you a Holiday Rambler RVs Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Mintaro 26RKS Holiday Rambler

  • Mintaro 26RKS Holiday Rambler

Most Popular Question

locate charging system wires converter

  • RVs
Loading...