SOURCE: brakes making a scarping noise when pulled.pads/discs ok
get some carbon lorraine pads, change your lines with HEL brand braided hoses, change brake fluid to synthetic DOT 4, lastly, if you still hear those, remove the brake rotors for final inspection for warp and finishing touches at a machine shop.
SOURCE: Brake light does not always work with front brake - Ninja 250
Check the wiring connections to the front brake switch. If all OK, then it could be the switch.
SOURCE: front brake makes low grinding noise
Better let the dealer look at it. This is a safety issue. It sounds like the brake pads need replaced. Do it VERY SOON or you may get the pleasure of spending $180 or so on a new brake rotor.
SOURCE: Back Rotor & brake replacement for 1500cc intruder have Question
>http://www.drumhillcycle.com/< Try this link for used parts. I would not use Aluminum rotors. To stop the squeak I would try a different brake pad. But you can take the pads off and file off the leading edge chamfer it a bit with a rasp. Not a lot but give it a 45 deg. both of the leading edges.
SOURCE: No brake light when the front brake is squeezed?!
The front brake lever is too tight or the wiring is bad.
Testimonial: "Rapid response and got it spot on!!"
188 views
Usually answered in minutes!
×