SOURCE: i am looking to print of a wireing diagram for a
remove the tank and look for the black and white wire going in to the CDI disconect it and see if you have spark. If you have look at the kill switch or ignition switch or wiring...This wire has to make contact with the frame to kill the engine....If you stiil have no spark let me know and Ill email you one...
SOURCE: my honda xr 125 hesitates sometimes when in rev
The 1st thing to try is change the spark plug
Also drain the carb by way of the drain screw at the bottom of the carb bowl
Ride Safe
Bike-Doc
Please mark as helpful(if it has been!!)
SOURCE: Need to know the mixture settings on the carb, 04
From a LIGHTLY seated position, turn both adjusting screws outward one and one half turns. This is the stock setting.
SOURCE: honda xr 125 to set tappet clearances and adjust
timing chain should be auto adjust. set valve clearence to inlet 4 thou, exhaust 6 thou
405 views
Usually answered in minutes!
×