The accessories switch on my 2000 heritage softail classic will not engage. Removed and cleaned switch, reinstalled, turned switch to accessories before complete reinstall. Brake, horn,signal
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Have you checked all your grounds sometimes you a loose ground will not or will lose connection on the ignition switch you should have two hot coming in and then when you turn it on and energizes the switch as long as you still have battery voltage there when you hit the start button you should be fine but start with your grounds for
It's located behind breaker box you have to lay on ground and their are 2 10 mm bolts that hold on black fender in front of rear tire remove those and lift up the top just hooks on and slide all the way down following contour of tire and then you can see inside ant their will be a little box with two studs and wires on each post that is your 30 amp breaker
×