SOURCE: where can i find header pipes for a 99 katana gsxf
many suzuki parts interchange you may be able to use an older gixxer header or a bandit header
SOURCE: need setting for carb. adjuster on bottom of carb
Turn the adjusting screw all the way in until it LIGHTLY seats. Now back it out one and one half turns. Do the same adjustment for the throttle screw on the right side of the carb. You are now back to the stock factory settings.
Could you take a moment and rate my answer? Thanks!
SOURCE: will gsxr 750 87 carb run on a gsxf 750 89 and do
no there not the same carbs the katana carbs are bst36ss. and the jetting is different Kats have 105 mains in carb 1,2,and 4 with a 110 in carb 3. 32.5 pilot jet
SOURCE: needle adjustments for 1999 Suzuki RM80 Need carb
Lightly seat the screws then open up each of them one and one half turns. This is the factory setting.
SOURCE: 1996 suzuki 750 katana can you buy just the carb bowl gasket and the gas needle valve
http://www.jcwhitney.com/fuel-systems/suzuki-motorcycle-gsx750f-katana/c51113d58771j1s21.jcwx
1,543 views
Usually answered in minutes!
×