You can find all the torque specs you need at Honda-Specs.com Torque Specs HONDA SPECS XR650L XR650R XR600R XL600R XL600L
SOURCE: Need cylinder and cylinder head torque specifications 98 XR 250
you dont need torque specs on that just use a 1/2 inch drive with you 14mm or16mm socket hold the wratchet right at the top and tighten it as tight as you could get it like that then use wratchet in normal position and just give it a little snugg it will be perfect i have done it a million time on the same type of bikes...
SOURCE: 93 artic cat jag head torque pattern and specs
the best place to find it is the service manual. if not avail. i usually 1, tighten it to ~10-20Nm in a 'outwards spiral' fashion, ie start tightening from centre bolts outwards. 2, spiral tighten by 1/4 turn, 3, another 1/4 turn, and 4, final 1/4 turn.
SOURCE: CYL HEAD BOLT TORQUE SPEC AND CAM HOLDER BOLT
Thank you for contacting FixYa with your inquiry. I have been going KTM Torque settings
over some of the older help requests that have been archieved and
trying to provide solutions for those that didn't get answered. Hope
this information helps.
TF
1,515 views
Usually answered in minutes!
×