Won.t start after replacing belt

SOURCE: I have a 150cc jonway scooter. When I open it up

I found that if I run 87 octane gasoline the engine accelerates up to full speed without the skipping and bogging down at any point it is running. It is worth trying. also try putting some "Sta-bil" fuel stabilizer in the gasoline - it has the ability to keep the carbureator cleaner. Not just during the time you are storing it, but rather all the time.

SOURCE: YY 150 Jonway cranks good but no start. Hits every

Yes the coil seems to be your problem.

SOURCE: Where can I get an electrical schematic for a

check out go scoot .com very large in china made scooter/atv/dirt bikes

SOURCE: there is no spark my scooter wont start what's

The problem may be the accumulator (battery). If you don't have a kicker, try changing the battery

SOURCE: Wont start. Turns over

had simular problem with my sl50qt-7 - qmb139 engine - was bad fuel pit **** pump at fuel tank - replaced it and filter and that took care of my problem.